Over the course of it's life, a motorbike will pick up swirl marks and scratches, whether it mainly lives in storage or is in daily use.
This detail will use a single-stage polishing process to remove the majority of swirls and scratches from the paintwork on your motorbike, along with correction of chromes where possible.
Pre-detail Inspection is carried out taking note of any damage found on the car prior to us undertaking any work.
Pre-detail rinse to remove loose dirt.
A full Citrus Pre-wash of the car, removing dirt without physically touching the vehicle.
Intricate details on the car are agitated with soft brushes to ensure no dirt is missed during the wash stage.
Wheels washed front and back using a PH Neutral wheel cleaner and soft brushes, safe for any finish.
Bonded iron contaminants removed from paint using De-ionizer.
Bonded tar contaminants removed using tar remover.
Washed using a microfibre wash mitt and 2 buckets (One for rinse, one for wash to avoid putting dirt back on the paint that could inflict swirls).
Clay bar is then used as a final decontamination step.
Multi stage gloss enhancement via machine polishing is undertaken.
Paint is wiped down to remove oils and residue of polish.
Carnauba hard wax applied to paint, offering up to and beyond 12 months of protection.
Wheel sealant applied to wheels, giving added protection against brake dust and other contaminants.
Plastics and rubber sealed to avoid fading.
Final wipe down using a gloss-enhancing detailing spray.
Prices Starting From: £125
Time taken: 4 hours
Time taken with coating: 12 hours
Upgrades: (Ceramic Coatings)
Nanolex Si3D BC (Better base for other coatings to adhere to) - £75
Nanolex SiShield (up to12 months) + £120
Nanolex Si3D (up to 24 months) + £160
Nanolex Si3DHD (up to 60 months) + £200
Wheel off Cleaning and Coating + £100